Netgear wifi extender n300 setup | www.mywifiext.net

VIDEO DESCRIPTION:

Play, download and edit the free video Netgear wifi extender n300 setup | www.mywifiext.net.

Netgear extender setup support helps you in understanding, how you can setup your netgear range extender device easily in less than 2 minutes

To install via WPS:

Step 1:- Place the extender in the same room as the WiFi Router.
Step 2:- Make sure you have a live internet connection coming from the main router. Also, make sure that the router is WPS capable.
Note: WPS does not support WEP Security. Change the security of your main router to WPA2-PSK (AES) for optimal performance.
If you do not wish to change your security type, please complete the setup via the browser setup.
Step 3:- Plug the extender into an electrical outlet and wait for the Power LED to become solid. If it does not turn ON, press the On/Off button on the side panel of the extender.
Step 4:- Press and hold the WPS button which is located on the side panel of the extender for a few seconds till the WPS LED starts blinking.

Step 5:- Within 2 minutes, press the WPS button on your wireless router, gateway, or access point. And wait for at least 2 minutes while the extender connects to your existing wireless network.
Step 6:- The WPS LED on the Extender should turn to solid green and the router LED should also turn solid green to let you know that your extender is connected to your main network.
Step 7:- If your router supports the 5GHz band, just repeat steps 4 and 5 to connect the extender to the 5GHz band.
Step 8:- Move the extender to your preferred location, but make sure it is in between the router and the wireless devices to get a good signal.
Step 9:- You can now connect your wireless devices to the Extender’s new SSID. The extenders wireless network name (SSID) changed to your existing WiFi network name with '_EXT' at the end. Password to be used will be the same WiFi password as the one on your main router.
Example:
Existing WiFi Network name (SSID): MyHomeNetwork
New Extender WiFi Network name (SSID): MyHomeNetwork_2GEXT and MyHomeNetwork_5GEXT
Note: If your wireless devices have a WPS feature; just press the WPS button on the extender and within 2 minutes, press the WPS button on your wireless device to instantly connect them without typing the wireless password.

Related Searches
netgear wifi extender n300 setup
netgear extender reset
netgear extender setup wps
netgear n300 wifi range extender
netgear ac1200 wifi range extender setup
netgear wifi extender setup without wps
ac750 wifi range extender setup

Get Instant Solution to all Problems ⌛

► Call Netgear Support:- (888) 346 4070 (Toll-Free Number)

This Video is the work of the Netgear support team.

DISCLAIMER: Please don't go out of your way to or hate on anyone I talk about in my videos, this channel is to educate people and I usually focus on education users through technology.
#NetgearExtender #Extender #Support #netgear #Setup #Guide #techsupport
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for fair use, for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.

Thanks For Watching.

Download, play and edit free videos and free audios from Netgear wifi extender n300 setup | www.mywifiext.net using RedcoolMedia.net web apps